Analog conductivity sensor
Indumax CLS52

Analog conductivity sensor Indumax CLS52 ©Endress+Hauser
Analog conductivity sensor Indumax CLS52 ©Endress+Hauser

The conductivity of a liquid can be measured using the conductive or toroidal measuring principles. This video shows what it is about and how these measuring principles work.

  • Analog conductivity sensor Indumax CLS52
  • Analog conductivity sensor Indumax CLS52

Toroidal conductivity sensor for hygienic and sterile applications

The Indumax CLS52 inductive conductivity sensor protects your products and processes in the food & beverage industry. It is equipped with a stainless steel temperature sensor that gives you an ultrafast temperature response to measure exactly in separation applications.

Componentes adicionais

  • Benefícios

    • Engineered for quick temperature response

    • Hygienic design avoids contamination

    • Suitable for cleaning-in-place (CIP) and sterilization-in-place (SIP)

    • Low risk of soiling due to encapsulated sensor

    • Insensitive to polarization

  • Campo de aplicação

    Indumax CLS52 measures toroidal conductivity especially in food & beverage applications, where a fast temperature response is needed, such as:

    • Alkaline/acid concentration control in remaking

    • Phase separation of product/water and product/product...

Características e especificações

Voltar

Details

  • Measuring principle

    Inductive

  • Application

    Food, pharmaceuticals

  • Characteristic

    Hygienic inductive measuring cell for conductivity measurements, concentration control, CIP-control, cleaning and phase separation.

  • Measurement range

    0.1 to 2000 mS/cm

  • Measuring principle

    Inductive conductivity measurement.

  • Design

    Hygienic inductive conductivity cell with an outside temperature sensor for a faster temperature reading.

  • Material

    Sensor: PEEK
    Heat contact nut: stainless steel 1.4435
    Sealing: Chemraz

  • Dimension

    Coil: outside diameter: appr. 47 mm inside diameter: appr. 15 mm

  • Process temperature

    Max. 125°C (short time up to 140°C)
    max. 257°F (short time up to 284°F)

  • Process pressure

    Max. 16 bar at 90 °C
    (Max. 232 psi at 194 °F)

  • Temperature sensor

    Integrated Pt100 in a heat contact nut

  • Ex certification

    ATEX

  • Connection

    Process connections: dairy fitting, Clamp, thread 1,5", Varivent, APV, Perlick, SMS cable: fixed cable connection.

  • Ingres protection

    IP67

  • Additional certifications

    Calibration certification.

Documentos / Manuais / Software

Acessórios / peças sobressalentes

Nr
Order code
Specification

Histórias de sucesso

  •

  • 22.06.2020 - 26.06.2020

    With the help of actual hands-on tasks you will learn how PROFIBUS fieldbus technology works in detail. At the end of the course you will be able to design and commission a PROFIBUS fieldbus network.

Comparar produtos